Repeaters, Digipeaters & EchoIRLP Node


Voice Repeaters

Willunga Hill

VK5RSC : 10 Metre FM Voice Repeater 29.620 Mhz (-100 kHz offset).

Status: Active

2 Metre FM Simplex Gateway 147.675 Mhz  141.3 Hz Tone.  (Linked to 10m Repeater)

Status: Active


VK5RSV : 2 Metre FM Voice Repeater 146.675 MHz (-600 kHz offset)  91.5 Hz Tone.  (EchoIRLP Node)

Status: Active


VK5RSV : 70 Centimetre C4FM Voice Repeater 439.825 MHz (-5 MHz offset).  (Formerly VK5RSC)

Status: Active -  WiresX and YSF Links


VK5RSC : 23 Centimetre FM Voice Repeater 1273.450 MHz (-20 MHz offset). 

Status: Moving to new location. Available Soon!



South Coast Voice Repeaters information

Victor Harbor

VK5RVH : 2 Metre FM Voice Repeater 147.100 MHz (-1.6 MHz offset)  91.5 Hz Tone  (Linked to Adelaide Repeater Network)

Status: Active  -  Linked to Adelaide Network


VK5RVH : 70 Centimetre FM Voice Repeater 438.525 MHz (-5 MHz offset)  91.5 Hz Tone (Local Stand-alone)

Status: Active



Voice Repeaters Location Map

(Includes South Coast Repeaters information)

South Coast Repeaters


APRS Digipeaters


VK5RSV-1 : APRS Digipeater 145.175 MHz (1200baud) simplex located at Willunga Hill.  (Formerly VK5RSC-1)

Status: Active


VK5ARC-1 : APRS Digipeater 145.175 MHz (1200baud) simplex located at Normanville.

Status: Active


VK5RVH-1 : APRS Digipeater 145.175 MHz (1200baud) simplex located at Victor Harbor.

Status: Active


VK5RAD-1 : APRS Digipeater 145.175 MHz (1200baud) simplex located at Crafers.

Status: Active


For SA APRS Network configuration information, see the SA APRS Settings heading on this Website.

Digipeater Location Map



Echolink & IRLP Nodes


VK5RSV: IRLP & Echolink Nodes - IRLP 6278 / ECHOLINK 143020.   (Formerly VK5RSC)

Status: Active -- (ON Test)


The Club currently hosts the IRLP Node #6278 and Echolink Node #143020.

NOW on it's VK5RSV 2m FM Voice Repeater on 146.675 MHz (91.5Hz) on Willunga Hill.

The nodes are operational and available 24 hours a day for all to use and is currently operating via a pin access system. 

You must identify prior to entering any access and DTMF command for the node to properly function.

For a Pass code required, please contact the secretary: This email address is being protected from spambots. You need JavaScript enabled to view it.


SCARC Committee.

Block [footer] not found!